The impact of blue-green infrastructure on trace contaminants: A catchment-wide assessment

Blue-green infrastructure (BGI) reduce urban combined sewer overflows (CSOs) and stormwater outlets (SWOs). However, most conventional BGI are not designed to remove trace organic contaminants. Little is known about the potential of conventional BGI to improve surface water quality by reducing the discharge of trace organic contaminants. We derived wash-off loads for street runoff (6PPD-q, DPG, and HMMM), construction materials (diuron), and wastewater-derived contaminants (diclofenac) based on measurements in the combined sewer system. Subsequently, the performance of four BGI types (bioretention cells, green roofs, porous pavements, and urban wetlands) to reduce the discharge of trace organic contaminants via SWOs and CSOs was quantified with a hydrodynamic SWMM model. Moreover, the catchment-wide impact of SWOs and CSOs on surface water was assessed using risk quotients. We found that the annually discharged load can be considerably reduced by implementing BGI. Among the studied BGI types, bioretention cells are the most effective, with a load reduction of up to 80% to surface waters, mainly due to a larger suitable implementation area and a substantial stormwater infiltration. BGI implemented in the separate sewer system are more effective in reducing stormwater contaminant loads than BGI in the combined system. The assessment of the risk quotient in the surface water showed that the concentrations during SWO and CSO discharges exceed the acute environmental threshold in the surface water for 6PPD-q, DPG, diuron, and diclofenac during several events. The implementation of BGI reduced the hours of exceeded risk quotient in the surface water by 93% for bioretention cells. These findings underscore the need for a catchment-wide assessment of future BGI implementations to quantify, manage, and mitigate the impacts of urban pollution.