Related Experiment Video
Updated: May 13, 2026

Separating Beads and Cells in Multi-channel Microfluidic Devices Using Dielectrophoresis and Laminar Flow
Published on: February 4, 2011
Real-time impedance-activated dielectrophoretic actuation for reconfigurable manipulation of single flowing particles
Alexis Lefevre1, Cristian Brandi2, Adele De Ninno3
1Université de Franche-Comté, CNRS, SUPMICROTECH-ENSMM, Institute FEMTO-ST, F-25000 Besançon, France.
Abstract:
This work presents an innovative all-electrical platform for selective single-particle manipulation. The platform combines microfluidic impedance cytometry for label-free particle characterization and dielectrophoresis for contactless multi-way particle separation. The microfluidic chip has a straightforward coplanar electrode layout and no particle pre-focusing mechanism is required. An original online algorithm analyzes the impedance signals of each incoming particle and regulates in real time the dielectrophoretic voltages according to a desired control logic. As a proof-of-concept, three operation modes are demonstrated on a mixture of 8, 10, and 12 μm diameter beads: (i) particle position swapping across the channel axis, irrespective of particle size, (ii) size-based particle separation, irrespective of particle position, and (iii) sorting of a selected sequence of particles. As a perspective, the versatility of impedance cytometry and dielectrophoresis, and the possibility of configuring alternative control logics, hold promise for advanced particle and cell manipulation.
More Related Videos
Related Concept Videos
RLC Series Circuits: Impedance
Thus, the magnitude of the impedance is given by the following equation,
Impedances and Admittance
Impedance is a measure of resistance to sinusoidal current flow in an AC circuit. Unlike their behavior in DC circuits, where inductors appear as short circuits and capacitors as open circuits, the behavior of these components in AC...
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...
Impedance Combination
Series R—L Circuit Transients
Using Kirchhoff's Voltage Law (KVL) to analyze this circuit helps determine the total asymmetrical fault current, which consists of...
Line Protection with Impedance Relays
Under normal conditions, low load currents keep the measured...

