Symmetric CRLH-TL filter based dual band microstrip antenna design approach

This paper presents a novel filter-based analysis for the conventional rectangular patch antenna (RPA) using the Composite Right/Left-Handed Transmission Line (CRLH-TL) theory. We introduce two circuit models for RPA, described by lumped components and transmission line (TL) elements. An RPA is considered a Symmetric CRLH-TL (SCRLH-TL). We validated the analysis by comparing the circuit model and full-wave analysis simulation results. The TL circuit model error in the full-wave analysis was less than 5%. A dual-band Zeroth-Order Resonant (ZOR) antenna is designed and manufactured based on the introduced Lumped element circuit model, which exhibits filtering characteristics in both bands. We obtain the antenna circuit model by incorporating the RPA lump circuit model with LC resonators. We implemented the antenna structure by combining the RPA and complementary split-ring resonators (CSRR) modeled by the LC resonators. We initialized the antenna center frequency bands for WiMAX 2.45 GHz and 3.60 GHz. The CSRRs control the configuration of the center frequencies. The simulation and measured results are in good agreement. The proposed antenna dimensions are 0.66 $$ 0.66 $$ 0.012 $$ at 2.45 GHz (43.22 $$ 43.22 $$ 0.81 mm³). The measured gains are 3.47 dB and 4.64 dB for 2.45 GHz and 3.60 GHz, respectively. Two radiation nulls were observed at 2.09 GHz and 2.98 GHz for the 2.45 GHz band and one radiation null at 3.45 GHz for the 3.60 GHz band. Also, the fractional bandwidth is 4.03% and 1.39%, respectively. The radiation pattern is nearly omnidirectional. The simulated efficiency is 90% for 2.45 GHz and 87% for 3.60 GHz frequency bands.