An Ultra-Broadband Conductor-Backed Coplanar Waveguide with Sine Edges

In this paper, a conductor-backed coplanar waveguide with sine edges (CBCPW-SE), consisting of a conductor-backed coplanar with periodic sine edges supported by a dielectric substrate, is proposed as a promising new transmission line (TL) at millimeter-wave and terahertz frequencies. This configuration offers a distinct advantage by maintaining a constant input impedance of 50 Ω across a broad frequency spectrum, eliminating the necessity for any additional impedance matching transitions, thereby enhancing the overall efficiency and simplicity of the transmission system. To verify the design, the CBCPW-SE was fabricated and measured. The measurement results demonstrate that, from 10 MHz to 100 GHz, the insertion loss is less than 0.1 dB/mm and the reflection coefficient is better than -10 dB. The measured S21 (dB) for a 50 mm-long CBCPW-SE section is less than -5 dB from 10 MHz to 100 GHz. The measured group delay per unit length of the trace is 3.4-5 ps, ranging from 10 MHz to 100 GHz. Moreover, the measured group velocity dispersion (GVD) approaches zero, signifying the minimal temporal spreading of the signal components, a crucial aspect for maintaining signal integrity and facilitating high-speed data transmission.