Boosted direct electrochemical reduction of As(III) from arsenic wastewater via Cu(II)-assisted codeposition on a...

Arsenic contamination is a severe environmental problem. A promising strategy for addressing this issue is the direct conversion of highly toxic As(III) to less toxic elemental arsenic (As(0)) using electrochemical reduction technology. In this study, a novel CuIn alloy nanoparticles-modified copper foam (CuIn NPs/CF) was prepared as an efficient cathode for the electrocatalytic reduction of highly mobile As(III) to solid As(0). Density functional theory (DFT) results revealed that the Cu-In bimetallic system exhibited weaker H atom bonding, and the Cu-ln surface was more favorable for the adsorption of *AsO₃ species than the Cu surface. Compared to the pristine CF electrode, CuIn NPs/CF was demonstrated to effectively suppressed the hydrogen evolution reaction with an enlarged hydrogen evolution potential of 1.45 V, and displayed a superior As(0) recovery yield. The conversion of As(III) to As(0) was further enhanced by adding Cu²⁺ to the electrolyte, facilitating a Cu-As co-deposition process. Notably, the CuIn NPs/CF electrode achieved an As(0) recovery yield of 5.38 mg cm⁻² after eight successive recycling tests. This work not only presents a green and sustainable strategy for As(III) removal, but also provides valuable insights into the rational design of Cu-based alloy cathodes for electrocatalytic reduction.