Related Experiment Video
Updated: Jun 9, 2025
Original Experimental Approach for Assessing Transport Fuel Stability
Published on: October 21, 2016
Optimal control of Hydrocarbon Reducer (HC) injection based on Trust-Region-Reflective Algorithm (TRRA) and physical
Wenlong Liu1, Ying Gao1, Yuelin You1
1State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130025, China; College of Automotive Engineering, Jilin University, Changchun 130025, China.
Abstract:
The aim of this paper is to control the DOC outlet gas temperature between 600 ± 15 °C by optimizing the hydrocarbon (HC) injection into the Diesel Oxidation Catalyst (DOC) for active regeneration of the downstream Diesel Particulate Filter (DPF). First, based on the physical model of the DOC thermal dynamics, the energy conservation equation for the gas phase temperature is simplified by using variable substitution, and the energy conservation equation for the solid phase temperature is simplified by considering only the heat generated by the HC injection. By solving the simplified model using the Trapezoidal Rule-Backward Differentiation Formula 2 (TR-BDF2) method and optimizing the model parameters in combination with the Gauss-Newton method, the computational efficiency and accuracy were significantly improved. Next, the DOC downstream temperature observer is designed by combining the solution characteristics of the DOC model with the unscented Kalman filter (UKF) algorithm to ensure that the catalyst operates within the optimal temperature range. Then, this paper verifies the accuracy of the model and observer through bench tests covering four steady-state operation conditions and World Harmonized Transient Cycle (WHTC) test cycle, and the results show that the model and observer exhibit high accuracy in both steady-state and transient operation conditions. Finally, the DOC temperature was successfully maintained between 600 ± 15 °C by optimizing the control of the HC injection rate, thus achieving the expected temperature control target. These research results provide theoretical and practical support for diesel engine emission control and DPF active regeneration.
More Related Videos
07:24Combustion Chemistry of Fuels: Quantitative Speciation Data Obtained from an Atmospheric High-temperature Flow Reactor with Coupled Molecular-beam Mass Spectrometer
Published on: February 19, 2018
11:33Laboratory Production of Biofuels and Biochemicals from a Rapeseed Oil through Catalytic Cracking Conversion
Published on: September 2, 2016
Related Concept Videos
01:19Root-Locus Method
This system can be represented by a block...
02:13Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
01:28Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
02:17Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
01:07Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
02:24Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.