Regulation of nucleation and crystallization for blade-coating large-area CsPbBr₃ perovskite light-emitting diodes

Metal halide perovskite light-emitting diodes (PeLEDs) and large-area perovskite color conversion layers for liquid crystal display exhibit great potential in the field of illumination and display. Blade-coating method stands out as a highly suitable technique for fabricating large-scale films, albeit with challenges such as uneven nucleation coverage and non-uniformity crystallization process. In this work, we developed an in-situ characterization measurement system to monitor the perovskite nucleation, and crystallization process. By incorporating formamidine acetate (FAAc) into perovskite precursor solutions, the nucleation rate and nuclei density of perovskite were increased, leading to more uniform nucleation. In addition, we inserted a layer of [2-(9H-carbazol-9-yl)ethyl] phosphonic acid above the poly(9-vinylcarbazole) hole transport layer. This layer acts as an anchor for the perovskite nano-crystal nuclei formed in the precursor, enhancing the steric hindrance of the solute and subsequently slowing down the crystal growth rate, thereby improving crystal quality. Based on these improvements, large-area perovskite nano-polycrystalline films with significantly improved uniformity and enhanced photoluminescence quantum yield were obtained. A small-area PeLED (2 mm × 2 mm) with a maximum external quantum efficiency of 25.91% was realized, marking the highest record of PeLED prepared by blade-coating method to date. An ultra-large-area PeLED (5 cm × 7 cm) was also prepared, which is the largest PeLED prepared by the solution method reported so far.