Experimental investigation of seismic performance of precast concrete shear walls with overlapping U-bar loop...

This paper discusses the seismic performance of five reduced-scale shear walls, including one cast-in-place (CIP) concrete shear wall, two precast concrete (PC) shear walls with overlapping U-bar loop connections, and two PC shear walls with modified form-overlapping U-bar loop connections combined with extruded sleeve connections. A quasi-static test was conducted to evaluate the reliability of the overlapping U-bar loop connections and the modified form by comparing the corresponding mechanical parameters of PC specimens with those of the CIP specimen. Moreover, the differences in seismic performance between the CIP specimen and PC specimens with different connection methods were also analyzed in terms of damage process, hysteretic loops and skeleton curves, load carrying capacity, ductility, equivalent stiffness, and energy dissipation. The experimental findings indicated that the mechanical performances of PC specimens with the modified connection form outperformed those of PC specimens with pure overlapping U-bar loop connections, closely resembling the properties of cast-in-place specimens; the failure mode of PC specimens was consistent with that of the CIP specimen; the generation, distribution and development of cracks in PC specimens were also similar to those in the CIP specimen. Furthermore, although the load-bearing capacity and peak displacement of PC specimens were lower than those of the CIP specimen due to the failure of the post-casted concrete strength to meet the requirements, the ductility, equivalent stiffness, and energy dissipation of PC specimens with the modified connection form closely matched that of the CIP specimen.