Ultrasensitive optical electric field sensor with temperature compensation for point-wise and quasi-distributed...

A point-wise and quasi-distributed optical sensing technique with the Vernier effect is proposed and achieved by multiplexing Fabry-Perot interferometers (FPIs). The FPIs are fabricated by LiNbO₃ (LN) crystals of varying lengths to enable simultaneous measurement of electric field (E-field) and temperature. Compared to the traditional bulk-type optical E-field sensors, this innovative sensor enables E-field measurement without being limited by half-wave voltage and effectively avoids the influence of natural birefringence. By an algorithm based on the Fourier transform, sub-FPIs are addressable, and their interference spectra can be demodulated independently, where any two FPIs are paired to generate the fundamental Vernier effect (FVE) or harmonic Vernier effect (HVE). Thus, the measurement sensitivities of FPIs can be significantly improved by monitoring the spectral shift of the envelope in the superimposed spectra. The quasi-distributed sensing experiment is conducted using three cascaded FPIs, yielding E-field sensitivities of 2.84 nm/E (FVE) and 3.37 nm/E (HVE), with a standard deviation (STD) of spectrum variation after temperature compensation below 3.19 × 10^-3. The proposed multiplexing method is significant for practical applications of the E-field quasi-distributed measurement.