Effective decontamination of DR-81 dye from aqueous solutions using eco-friendly graphene oxide nanoparticles

Effective management of industrial and agricultural wastes requires a multifaceted approach that considers environmental, economic, and social factors. Our ability to recover resources and create a circular bioeconomy from agricultural waste can be enhanced by implementing sustainable methods such as reducing, reusing, and recycling it. Active graphene oxide (GO) was prepared through the gasification of agricultural waste and further mixed with FeAlO_x catalyst for three hours at 800 °C as an efficient adsorbent. The synthesized material was comprehensively characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area analysis, and thermal gravimetrical analysis. In order to remove direct red 81 (DR-81) dye from wastewater, the synthesized nanomaterial was implemented as an effective adsorbent. Several processing variables, including pH, contact time, and dosage, were studied to examine the optimum conditions that directly influence the DR-81 decontamination of onto the fabricated GO. The optimal dosage from the synthesized GO for DR-81 decontamination was 0.5 g/L at pH = 7 after 30 min. At pH 7.0 and 25 °C, the produced GO had the highest sorption capacity of 132.14 mg/g towards the DR-81. In addition, equilibrium and kinetic studies were capably fitted via the Freundlich and pseudo-second-order models, respectively. As a result of its particular properties, which include a high surface area, adsorption capacity, structural robustness, variation tolerance, and thermal stability. These promising findings supported the usage of synthesized GO as a superior adsorbent material for DR-81 decontamination from wastewater.