Related Experiment Video
Updated: Jun 15, 2026

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Perovskite Thin-Film Transistors for Ultra-Low-Voltage Neuromorphic Visions
Yang Rong1, De Yu1, Xin Zhang1
1Ministry of Industry and Information Technology Key Lab of Micro-Nano Optoelectronic Information System, Guangdong Provincial Key Laboratory of Semiconductor Optoelectronic Materials and Intelligent Photonic Systems, Harbin Institute of Technology (Shenzhen), Shenzhen, Guangdong, 518055, China.
Abstract:
Perovskite thin-film transistors (TFTs) simultaneously possessing exceptional carrier transport capabilities, nonvolatile memory effects, and photosensitivity have recently attracted attention in fields of both complementary circuits and neuromorphic computing. Despite continuous performance improvements through additive and composition engineering of the channel materials, the equally crucial dielectric/channel interfaces of perovskite TFTs have remained underexplored. Here, it is demonstrated that engineering the dielectric/channel interface in 2D tin perovskite TFTs not only enhances the performance and operational stability for their utilization in complementary circuits but also enables efficient synaptic behaviors (optical information sensing and storage) under an extremely low operating voltage of -1 mV at the same time. The interface-engineered TFT arrays operating at -1 mV are then demonstrated as the preprocessing hardware for neuromorphic visions with pattern recognition accuracy of 92.2% and long-term memory capability. Such a low operating voltage provides operational feasibility to the design of large-scale-integrated and wearable/implantable neuromorphic hardware.
Related Concept Videos
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
Non-ohmic Devices
Consider a simple circuit consisting of a battery, a diode, and a resistor. A diode...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...

