Related Experiment Video
Updated: Jul 22, 2026

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
Simulation study on heavy metals, phthalate esters, and organic halogens: Content and distribution characteristics
Lingyun Cheng1, Bo Yue2, Bangbang Meng1
1Chinese Research Academy of Environmental Sciences, Beijing, 100012, China.
Abstract:
Imported waste paper and recycled pulp may contain pollutants, posing potential environmental risks to the ecosystem of China. This study examined the presence and distribution patterns of heavy metals, phthalate esters (PAEs), and adsorbable organic halogens (AOX) in recycled pulp and production wastewater after various recycling processes of three typical restricted types of imported waste paper. The results indicated that the concentration ranges of heavy metals, PAEs, and AOX in the three types of imported recycled waste paper were 21.61-40.38 mg/kg, 15.35-27.88 mg/kg, and 19.21-57.72 mg/kg, respectively. The comparative analysis with the initial waste paper demonstrated a reduction in heavy metal content in the recycled pulp by 17.80-49.75%, PAEs by 65.42-90.55%, and AOX by 32.80-42.34%. The average concentrations of these pollutants in wastewater were 0.85-1.66 mg/L, 27.28-59.86 mg/L, and 1.15-3.34 mg/L, respectively. Chromium and lead were identified as the primary heavy metals present in the waste paper. Following pulping, No. 1 and No. 2 met the arsenic and lead levels specified in the "Reuse Fiber Pulp" standard (GB/T24320-2021), whereas No. 3 met these criteria after de-inking only. The main PAEs detected in the waste paper were dibutyl phthalate and di(2-ethylhexyl) phthalate, most of which were removed during the pulping stage. Significantly higher levels of AOX were observed in No. 2 and No. 3 than in No. 1, with a minimal impact on AOX removal from the pulp during the recycling process.
More Related Videos
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
10:12Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis
Published on: July 1, 2017
Related Concept Videos
Qualitative Analysis
For instance, group IV...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Precipitation and Co-precipitation
Electrodeposition
Electrodeposition can...
Extraction: Advanced Methods