Related Experiment Video
Updated: Jun 8, 2025
Author Spotlight: Employing Green-Chemistry Principles for Safe and Sustainable Synthesis of Biodiesels
Published on: April 19, 2024
Circulation process of methyl ester production from pretreated sludge palm oil using CaO/ABS catalytic static mixer
Kritsakon Pongraktham1, Krit Somnuk1
1Department of Mechanical and Mechatronics Engineering, Faculty of Engineering, Prince of Songkla University, Hat Yai, Songkhla 90110, Thailand.
Abstract:
This study investigates the potential of fused deposition modeling (FDM) three-dimensional (3D) printing techniques for manufacturing catalytic static mixers during biodiesel synthesis. The printed catalytic mixing elements comprises acrylonitrile butadiene styrene (ABS) plastic with 15 wt% calcium oxide (CaO) as a solid catalyst. When the reactants flowed through the CaO/ABS mixing device, the blending and acceleration processes were both significantly impacted. Moreover, their characteristics, performance in biodiesel production, reusability, and economy were analyzed. The effects of methanol to oil (M:O) molar ratio, circulation time, and sonication time on methyl ester (ME) purity were also examined. The results showed that CaO crystals were distributed on the CaO/ABS mixer's surface, which is crucial for catalytic purposes. During circulation process of ME from pretreated sludge palm oil (PSPO), catalytic static mixer (CSM) and CSM coupled with ultrasound (CSM/US) reactors were employed. The full ultrasonic power of CSM/US reactor of 16 × 400 W (total 6400 W) was operated at 20 kHz frequency. Moreover, the continuous and pulse ultrasonic modes of CSM/US reactor were compared to determine the ME purity and electricity consumption for ME production. For the CSM reactor, 12:1 M:O molar ratio and 8.5 h circulation time were recommended to realize 94.2 wt% ME purity. For the CSM/US reactor, 12:1 M:O molar ratio and 2.25 h circulation time were recommended to achieve 96.5 wt% ME purity. Under the pulsed mode operation, ME purity of 95.09 wt% was achieved, with a reduction in electricity consumption by approximately 37.6 % compared to continuous mode operation. Furthermore, the CaO/ABS catalytic static mixer was determined to be reusable for up to three cycles in both CSM and CSM/US reactors. Thus, CaO/ABS catalytic static mixers assure high purity ME production through FDM 3D printing technology with a CaO solid catalyst.
