Dynamic Screw Lead Accuracy Measurement: Research on the Compensation of the Workpiece Placed Away from the Ideal...

The screw, a critical element in a variety of transmission mechanisms, significantly influences the performance of the transmission process. Accurate measurement of screw lead is crucial for ensuring the quality of transmission equipment. However, the measurement process can be affected by the precision limits of the measuring instruments and the challenges of manual fine adjustments. This can lead to the screw being misplaced, introducing errors due to the off-center positioning of the workpiece. Such errors can hinder the achievement of high-precision measurements. This research aims to reduce the time needed to adjust for workpiece misalignment and to improve the accuracy of screw lead measurement through error compensation. This study starts by examining two specific scenarios that can cause workpiece misalignment in screw lead accuracy measurements: the tilting of the workpiece and the misalignment of the workpiece axis relative to the circular grating axis. Then, a mathematical model to quantify this misalignment and measure the associated parameters is developed. Based on the measured parameters, a computational model is established to compensate for the bias error under these conditions. This method allows for efficient and precise measurement of the screw lead even when the workpiece is not perfectly aligned. Calibrated screws and a digital micrometer are used to conduct experiments on workpiece misalignment. By comparing measurements with and without error compensation, the effectiveness of the compensation method in enhancing measurement accuracy is demonstrated.