Extrusion Parameters Optimization and Mechanical Properties of Bio-Polyamide 11-Based Biocomposites Reinforced with...

The increasing demand for sustainable materials in high-value applications, particularly in the automotive industry, has prompted the development of biocomposites based on renewable or recyclable matrices and natural fibers as reinforcements. In this context, this paper aimed to produce composites with improved mechanical and thermal properties (tensile, flexural, and heat deflection temperature) through an optimized process pathway using a biobased polyamide reinforced with short basalt fibers. This study emphasizes the critical impact of fiber length, matrix adhesion, and the variation in matrix properties with increasing fiber content. These factors influence the properties of short-fiber composites produced via primary processing using extrusion and shaped through injection molding. The aim of this work was to optimize extrusion conditions using a 1D simulation software to minimize excessive fiber fragmentation during the extrusion process. The predictive model's capacity to forecast fiber degradation and the extent of additional fiber breakage during extrusion was evaluated. Furthermore, the impact of injection molding on these conditions was investigated. Moreover, a comprehensive thermomechanical characterization of the composites, comprising 10%, 20%, and 30% fiber content, was carried out, focusing on the correlation with morphology and processing using SEM and micro-CT analyses. In particular, how the extrusion process parameters adopted can influence fiber breakage and how injection molding can influence the fiber orientation were investigated, highlighting their influence in determining the final mechanical properties of short fiber composites. By optimizing the process parameters, an increment with respect to bio-PA11 in the tensile strength of 38%, stiffness of 140%, and HDT of 77% compared to the matrix were obtained.