Experimental and theoretical investigation of cationic-based fluorescent-tagged polyacrylate copolymers for improving...

The growing need for energy and the depletion of oil wells necessitate advanced Enhanced Oil Recovery (EOR) techniques, particularly water and polymer flooding, which play a crucial role in augmenting hydrocarbon recovery rates. However, water flooding in high-permeability layers often leads to water breakthroughs, reduced sweep efficiency, and the formation of preferential channels, posing significant challenges to oil recovery and reservoir management. Conformance control treatments, including the use of polymer microspheres, offer a promising solution by sealing high-permeability zones and enhancing sweep efficiency. This study focuses on the application of fluorescent polymer microspheres based on polyacrylamide, which is extensively employed in the oil sector as an oil displacement agent. Fluorescent polymers called Poly 400, Poly 200, and Poly 600, incorporating cationic methacrylamide monomers, were synthesized through copolymerization to create amphiphilic polymers with enhanced stability and functionality. These fluorescent polymers were evaluated through flooding tests using a quarter-five-spot model of transparent quartz glass under UV light, allowing for instantaneous measurement and observation of fluorescence intensity. At reservoir conditions, the oil displacement experiments confirm that the incremental oil after water flooding by Poly 400, Poly 200, and Poly 600, is 13.1%, 9.1%, and 6.1% of OOIP respectively. The findings showed that fluorescent polymer microspheres could efficiently target high-permeability layers, adapt to varying pore throat sizes, and improve the plugging rate of high-permeability channels, thereby optimizing oil recovery. A subsequent simulation study using the CMG simulator provided further insights into the efficacy of these fluorescent polymers as EOR agents, revealing their potential to enhance sweep efficiency and enhance oil recovery. Simulation results showed that oil saturation decreased from 68% (initial) to 13.5%, 16.1%, and 18.3% after Poly 400, Poly 200, and Poly 600 flooding respectively. This work highlights the potential of fluorescent polymer microspheres as a valuable tool for EOR applications, offering significant advancements in reservoir management and oil recovery optimization.