Method development and comprehensive study of matrix effects for the determination of trace organic contaminants in...

The presence of trace organic contaminants (TrOCs), such as pharmaceuticals, personal care products, additives, and polar pesticides in sediments of rivers and lakes highly impacted by anthropogenic activities makes sediments a secondary source of contamination for aquatic ecosystems. Considering this, a method for analyzing 44 TrOCs of diverse nature (including five transformation products, 13 pharmaceuticals, five personal care products, 14 pesticides, and seven additives) was developed and validated. It is based on extraction by pressurized liquid extraction (PLE), followed by purification and pre-concentration by solid phase extraction (SPE) and quantification by liquid chromatography coupled to a triple quadrupole mass spectrometer (LC-QqQMS). The method was optimized according to dispersant type, temperature, and extraction solvent. The influence of organic matter in sediments on quantitative analysis was also investigated in detail. Matrix effects were highly and significantly correlated (r=-0.9146, p < 0.0001) with retention time. Using internal standards showed the best results for effectively correcting matrix effects without affecting method sensitivity. The method was then validated according to key figures of merit: linearity (R² > 0.990), extraction recoveries (> 60 % for 34 compounds), trueness (bias % < 15 %), precision (relative standard deviation < 20 %) and matrix effects (between -13.3 % and 17.8 %). This method can be applied for routine analysis of TrOCs in different sediment matrices. The method was applied to ten lake sediment samples collected in Québec, Canada. Results demonstrated the presence of 17 compounds in at least one lake at concentrations between 0.07 to 1531 ng g^-1. The reported concentrations provide a first picture of the occurrence of chemical stressors in sediments of small lake highly anthropized ecosystems in Eastern Canada.