Multifunctional and multispectral polarization converter and checkerboard metasurface design with low infrared...

With the continuous development of detection technology, single detection technologies such as radar and infrared (IR) can no longer meet the current detection needs. The design of metamaterials is gradually moving towards multispectral compatible design. In this work, a polarization converter with low IR emissivity and a checkerboard metasurface with radar-IR bi-stealth were proposed. The filling rate of indium-tin-oxide(ITO) is increased to reduce the IR emissivity without affecting the polarization conversion efficiency. In addition, based on the radar cross section (RCS) reduction theory of the checkerboard composed of polarization conversion units, a broadband RCS reduction radar-IR bi-stealth structure is designed and analyzed. A sample was fabricated and the IR and microwave characteristics of the metasurface were measured. The numerical simulation results are in good agreement with the measurement results. The results show that the polarization conversion rate (PCR) is higher than 90% in the frequency range of 7.98-12.02 GHz, and the axial ratio (AR) is between 0.5 and 2 in the frequency range of 6.92-7.56 GHz and 12.48-15.78 GHz for the proposed polarization converter. The RCS reduction of the checkerboard metasurface exceeded 10 dB in the frequency range of 7.7-11.8 GHz. Meanwhile, the IR emissivity is less than 0.3 in 8-14 µm and the structure exhibits good optical transparency. This indicates the potential application of the proposed structure in multifunctional and multispectral compatible materials.