Demonstration of standing cavity Brillouin random fiber lasers using double fiber Bragg grating arrays

Bidirectional feedback by fiber Bragg grating arrays (FBGAs) reduced the loss of the cavity and increased stimulated Brillouin scattering (SBS) gain by bi-directional Stokes wave through FBGA associated Rayleigh feedback of the pump wave. As a result, the Q value of the Brillouin random fiber laser (BRFL) increased significantly, which leads to narrow linewidth. This is different from the ring configuration with unidirectional SBS gain versus dual SBS gain of the same fiber length. Highly efficient use of the SBS gain fiber for coherent SBS amplification suppressed thermal noise associated Stokes wave. Such an efficient SBS laser is realized by a standing cavity BRFL based on double FBGAs. Multiple scattering of light traveling in strong scattering FBGAs enables light localization and the generation of high-Q reflection peaks. Coherent SBS amplification with high Q help to reduce laser relative intensity noise (RIN) and laser linewidth. Experimental results demonstrate that the BRFL supports localized modes by increasing the scattering strength of the FBGA random feedback, resulting in long lifetime and single-frequency emission with 20 dB noise floor reduction. The BRFL with a 1 km Brillouin gain fiber exhibits lower RIN and narrower linewidth than that with a 10 km Brillouin gain fiber due to the stronger gain competition of more modes in the longer cavity length. The optimized standing caivty BRFL with 1 km gain fiber leads to 3.5 kHz linewidth versus 40 kHz from the pump laser. These findings provide experimental evidence that double FBGAs offer a unique setting to control mode dynamics, realizing low-noise single-frequency lasing.