Miura-ori based reconfigurable multilayer absorber for high-efficiency wide-angle absorption

Radar stealth structures that can achieve high-efficiency wide-angle absorption are key components of future military equipment. However, it is difficult for both planar and three-dimensional (3D) absorbers to achieve efficient absorption in a large incidence angle range. The multilayer reconfigurable absorber component based on Miura origami provides a unique solution. First, the multilayer origami absorber is parameterized in the simulation software. Each origami structure is covered with resistive films that fit the panels. Geometric constraints are satisfied among the multilayer structures. They support reconfigurability in the range of continuous states (as opposed to discrete states), which is conducive to finding the folded state with a more efficient absorption rate within the frequency band. Secondly, the designed structure does not require a specialized mechanically supported multilayer origami absorber. In addition, the equivalent analogue circuit method is used to analyze the efficient absorption of multilayer origami under oblique incidence. Finally, our proposed absorber satisfies the requirements of multiple absorption metrics: broadband, high efficiency, wide incidence angle, and polarization insensitivity. As the validation, we simulated and fabricated a double-layer origami absorber. Our proposed origami absorber can maintain an absorption rate of more than 90% for both transverse electric (TE) and transverse magnetic (TM) polarizations in the operating frequency band (5-20 GHz) over a wide range of incidence angles (0°-70°). When the incidence angle q_inc = 40°, the double-layer origami absorber (q₁= 90°, α₁= 60°, and a₂= 75°) can achieve at least 10 dB reflection reduction of -18 dB and -20 dB in TE and TM modes, respectively. The proposed origami absorber provides a reference for the design of other absorbers.