Related Experiment Video
Updated: Jun 7, 2025

Electrochemically and Bioelectrochemically Induced Ammonium Recovery
Published on: January 22, 2015
Application of central composite design for commercial laundry wastewater treatment by packed bed electrocoagulation
Sushil Kumar1, Patrick Drogui1, R D Tyagi2
1Institut National de la Recherche Scientifique (INRS), Centre-Eau Terre Environnement (ETE), Université du Québec, 490 Rue de la Couronne, Québec, QC, G1K 9A9, Canada.
Abstract:
This research paper deals with a novel method utilizing packed bed electrocoagulation (PBEC) comprising of sacrificial iron electrodes and coupled with extracellular polymeric substances (EPS) used as flocculent agents for the treatment of commercial laundry wastewater (LWW). The study employs stainless steel cathodes, graphite anodes, and scrap iron pieces as sacrificial electrodes, ensuring efficient treatment in dynamic batch mode operation with enhanced contact time facilitated by serpentine flow. The initial characteristics of LWW were COD 579 ± 30 mg/L, TSS of 60 ± 10 mg/L, TS of 622 ± 20 mg/L, turbidity of 110 ± 5 NTU, pH of 9 ± 0.5, NPEOs of 570 ± 150 μg/L and conductivity of 494 ± 20 mS/cm. The results demonstrate effective removal of turbidity (98 ± 2%), TS (95 ± 3%), COD (89 ± 5%), and NPEOs (53 ± 2%) under optimized current intensity: 2.99 A, treatment time: 58.8 min and enhanced EPS dose from 5.8 mg/L to 8.0 mg/L. The economic feasibility analysis reveals energy consumption as the primary expenditure, with a treatment cost of 1.20$CAN/m3. This research introduces sustainable treatment for commercial LWW, meeting Quebec's reuse standards, implying reuse potential and responsible wastewater management.
Related Concept Videos
Coagulation
Electrodeposition
Electrodeposition can...
Ion-Exchange Chromatography
Precipitation and Co-precipitation

