Related Experiment Video
Updated: Jun 6, 2025

Improving the Combustion Performance of a Hybrid Rocket Engine using a Novel Fuel Grain with a Nested Helical Structure
Published on: January 18, 2021
Operation parameters investigation on combustion and emission of a non-road diesel engine based on orthogonal
Zhaojun Song1, Lianjiang Xu1, Lan Zhang2
1School of Mechanical and Electrical Engineering, Yunnan Open University, Kunming, 650000, China.
Abstract:
For improving the combustion and emission performance of engines operating at high altitude regions, a two OED optimization method was proposed. The influence of each factor on the target was analyzed and discussed through a primary OED. Based on the primary OED test, factors with less influence were excluded to reduce factors in the secondary OED test. The results showed that low intake pressure led to poor spray mixing, prolonged ignition delay, and incomplete combustion, resulting in deteriorated power output, fuel economy, and emission characteristics. After two OED optimizations, The NOx emissions increased significantly by 40.5 % and 122.5 % in the first and second optimization, respectively, however, the ISFC decreased by 13.4 % and 25.2 %, and CO decreased by 13.0 % and 25.2 % in the first and second optimization, respectively, as well as ultra-low carbon smoke emissions was achieved. The related theories and methods' advantage can be extended to engineering applications and has good practical value.
Related Concept Videos
Otto and Diesel Cycle
Work Done in an Adiabatic Process
Internal Combustion Engine

