Related Experiment Video
Updated: Jun 6, 2025

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method
Published on: October 6, 2017
Composite of knitted fabric and soft matrix. I. Crack growth in the course direction
Fengkai Liu1, Xi Chen1, Zhigang Suo2
1State Key Lab for Strength and Vibration of Mechanical Structures, International Center for Applied Mechanics, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an, China. tangjd@mail.xjtu.edu.cn.
Abstract:
A composite of a knitted fabric and a soft matrix enables applications that require low stiffness and high crack resistance. Examples include heart valves and stretchable strain sensors. Here we study processes of crack growth in such a composite under monotonic and cyclic stretch. We fabricate a composite using a knitted fabric of nylon yarn and an elastomer matrix of polycarbonate urethane. We precut a sample with a crack, monotonically stretch the sample, and observe the growth of the crack. The crack grows in the matrix as the yarn slips and breaks. The stretch is converted to energy release rate G. We identify two critical energy release rates, GA and GB. When G < GA, the yarn does not slip, and the crack does not grow in the matrix. When GA < G < GB, the yarn slips but does not break, and the crack grows in the matrix stably and arrests when the stretch stops increasing. When G = GB, the yarn slips and breaks, while the crack grows unstably. When the sample is subject to cyclic stretch, we observe analogous behavior of crack growth and arrest, as well as yarn slip and yarn break. However, the two critical values, Ga and Gb, are much smaller than the corresponding values under monotonic stretch.
More Related Videos
Related Concept Videos
Microcracking in Concrete
Types of Non-structural Cracks in Concrete
Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Effects of Creep
Members Made of Elastoplastic Material
As the bending moment...
Stress-Strain Diagram - Brittle Materials

