Improving the NO₂ Gas Sensing Performances at Room Temperature Based on TiO₂ NTs/rGO Heterojunction Nanocomposites

The development of energy-efficient, sensitive, and reliable gas sensors for monitoring NO₂ concentrations has garnered considerable attention in recent years. In this manuscript, TiO₂ nanotube arrays/reduced graphene oxide nanocomposites with varying rGO contents (TiO₂ NTs/rGO) were synthesized via a two-step method for room temperature NO₂ gas detection. From SEM and TEM images, it is evident that the rGO sheets not only partially surround the TiO₂ nanotubes but also establish interconnection bridges between adjacent nanotubes, which is anticipated to enhance electron-hole separation by facilitating electron transfer. The optimized TiO₂ NTs/rGO sensor demonstrated a sensitive response of 19.1 to 1 ppm of NO₂, a 5.26-fold improvement over the undoped TiO₂ sensor. Additionally, rGO doping significantly enhanced the sensor's response/recovery times, reducing them from 24 s/42 s to 18 s/33 s with just 1 wt.% rGO. These enhancements are attributed to the increased specific surface area, higher concentration of chemisorbed oxygen species, and the formation of p-n heterojunctions between TiO₂ and rGO within the nanocomposites. This study provides valuable insights for the development of TiO₂/graphene-based gas sensors for detecting oxidizing gases at room temperature.