A Comprehensive Investigation on Catalytic Behavior of Anaerobic Jar Gassing Systems and Design of an Enhanced...

The rapid and reliable diagnosis of anaerobic bacteria constitutes one of the key procedures in clinical microbiology. Automatic jar gassing systems are commonly used laboratory instruments for this purpose. The most critical factors affecting the cultivation performance of these systems are the level of residual oxygen remaining in the anaerobic jar and the reaction rate determined by the Pd/Al₂O₃ catalyst. The main objective of the presented study is to design and manufacture an enhanced jar gassing system equipped with an extremum seeking-based estimation algorithm that combines real-time data and a reaction model of the Pd/Al₂O₃ catalyst. The microkinetic behavior of the palladium catalyst was modeled through a learning-from-experiment methodology. The majority of microkinetic model parameters were derived from material characterization analysis. A comparative validation test of the designed cultivation system was conducted using conventional gas pouches via six different bacterial strains. The results demonstrated high cell viability, with colony counts ranging from 1.26 × 10⁵ to 2.17 × 10⁵ CFU mL^-1. The favorable catalyst facets for water formation on Pd surfaces and the crystal structure of Pd/Al₂O₃ pellets were identified by X-Ray diffraction analysis (XRD). The doping ratio of the noble metal (Pd) and the support material (Al₂O₃) was validated via energy-dispersive spectroscopy (EDS) measurements as 0.68% and 99.32%, respectively. The porous structure of the catalyst was also analyzed by scanning electron microscopy (SEM). During the reference clinical trial, the estimation algorithm was terminated after 878 iterations, having reached its predetermined termination value. The measured and modelled reaction rates were found to converge with a root-mean-squared error (RMSE) of less than 10^-4, and the Arrhenius parameters of ongoing catalytic reaction were obtained. Additionally, our research offers a comprehensive analysis of anaerobic jar gassing systems from an engineering perspective, providing novel insights that are absent from the existing literature.