Related Experiment Video
Updated: Jun 6, 2025

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Internally Harmonic Matched Compact GaN Power Amplifier with 78.5% PAE for 2.45 GHz Wireless Power Transfer Systems
Caoyu Li1, Ziliang Zhang1,2, Yi Pei3
1Yangtze Delta Region Institute (Huzhou), University of Electronic Science and Technology of China, Huzhou 313001, China.
Abstract:
In this paper, a high-efficiency compact power amplifier is designed and fabricated with a 0.25 μm GaN high electron mobility transistor (HEMT) to meet the demands of a high integration level and high efficiency for microwave wireless power transfer (WPT) systems. The proposed power amplifier (PA) is implemented using an internally matched method to achieve a compact circuit size. The output second and third harmonic impedances can be optimized through output matching circuits, eliminating the need for additional harmonic matching networks. This approach simplifies the design of matching circuits and reduces the circuit size. Furthermore, the input third harmonic has been controled for improving the efficiency of DC-to-RF conversion. The total size of the proposed PA is 13.4 × 13.5 mm2. The test results obtained from the continuous wave (CW) testing indicate that the output power of the power amplifier at 2.45 GHz reaches 43.75 dBm. Additionally, the large-signal gain is measured at 15.75 dB, and the power-added efficiency (PAE) achieves a value of 78.5%.
Related Concept Videos
Maximum Power Transfer
By substituting the entire circuit with...
MOSFET Amplifiers
BJT Amplifiers
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role...
Power Factor Correction
The Maximum Power Transfer Theorem
The load connected draws the current, and the circuit delivers the power to the load. The alternating current flowing through the load is determined using the rectangular form of voltages, currents, network impedance, and load impedance. The average power delivered to the load is obtained from the product of the square of current and load resistance.
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...

