Numerical Investigation of the Impact of Cracks and Stiffness Loss in the Supporting System for the Dynamic...

In the literature on rotating machinery, many articles discuss the analysis of various rotor and bearing defects, including both sliding and rolling bearings. Defects in the rotor supporting system are investigated much less frequently. In rotor-bearing-supporting structure systems, where there are couplings between the individual sub-systems, damage to the supporting structure can significantly impact the dynamic properties of the entire machine. The authors of this article have, therefore, focused on analysing the defects that can occur in the supporting system of the rotor and bearings. This article presents the results of a numerical analysis of two common defects in the supporting structure: cracks in the bolted joints attaching the machine body to the foundation and a decrease in foundation stiffness. The research object was a test rig that accurately reproduced the dynamic phenomena occurring in rotating machinery, such as vapour and gas turbines. In the numerical model of the rotating machine, a three-dimensional linear model of the supporting structure was combined with a beam model of the rotor line via a nonlinear fluid film-bearing model. The developed model allowed for the analysis of two different failures in the supporting system over a wide range of rotational speeds. The calculations showed that damage to the supporting structure can significantly impact the dynamic characteristics of the entire rotating machine.