Related Experiment Video
Updated: Jun 6, 2025

Synthesis and Testing of Supported Pt-Cu Solid Solution Nanoparticle Catalysts for Propane Dehydrogenation
Published on: July 18, 2017
Simulation study on hydrogen concentration distribution in hydrogen blended natural gas transportation pipeline
Weiqing Xu1,2, Yongwei An3, Shuangjie Yan3
1School of Automation Science and Electrical Engineering, Beihang University, Beijing, China.
Abstract:
Hydrogen is a clean energy source, and blending it with natural gas in existing pipeline networks is a key transition solution for transportation cost reduction. However, during the transportation process, a non-uniform distribution of hydrogen concentration occurs in the pipeline due to gravity. Therefore, it is necessary to study the hydrogen concentration distribution law of hydrogen-blended natural gas in pipelines. The undulation and ball valve pipelines, which are common in transport pipelines, were constructed in this study. The effects of the undulation angle, height, pipeline diameter, ball valve opening, and temperature on the distribution of the hydrogen concentration were investigated using computational fluid dynamic (CFD) methods. The results indicated that the hydrogen concentration gradient changed gently with the larger diameter of the undulating pipeline, minimizing hydrogen accumulation. Higher undulation angle and smaller height differences reduces the hydrogen accumulation risk. Increasing vertical height difference of the pipeline from 5 m to 15 m increased the hydrogen volume fraction gradient by1.3 times. In the ball valve pipeline, the velocity fluctuation decreased as the ball valve opening increased. However, the hydrogen accumulation phenomenon was obvious. The opening increased from 25% to 100% and the hydrogen volume fraction gradient increased more than two times. Selecting delivery conditions with low hydrogen blending ratios, high temperatures, low pressures, and high flow rates reduces the occurrence of hydrogen buildup in the pipeline.
Related Concept Videos
Design Example: Flow of Oil Through Circular Pipes
Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...
Turbulent Flow: Problem Solving
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures...
Behavior of Gas Molecules: Molecular Diffusion, Mean Free Path, and Effusion

