Identifying and Prioritizing Hazardous Chemicals in Construction Metal Structure Coating Systems: A Roadmap for
Paridhi Patel1, Dhimiter Bello2, Anila Bello1
1Department of Public Health, Zuckerberg College of Health Sciences, University of Massachusetts Lowell, Lowell, Massachusetts, USA.
Introduction:
Occupational exposure as a painter was classified by the International Agency for Research on Cancer (IARC) as a Group 1 carcinogen (carcinogenic to humans) in 1989. Chemical agents responsible for cancers and other illnesses among industrial painters are not well-documented. The goal of this systematic review and synthesis was to document the chemistries of metal structure coating systems, summarize data gaps on occupational exposures and health effects among painters, and identify and prioritize hazardous chemicals to guide future exposure and occupational health studies, and ultimately disease prevention efforts.
Methods:
We reviewed coating products approved by the Northeast Protective Coating Committee (NEPCOAT) for use in steel bridges in New England, with a special focus on Part B of these reactive chemical systems, and related literature on exposures and health effects.
Results:
From the review of safety datasheets (SDS), we identified 61 unique CAS numbers belonging to different Part B chemical groups of isocyanate- and epoxy-based formulations, including amine hardeners, solvents, nanomaterials, and other additives. The list of identified ingredients contained 14 potent sensitizers, two IARC Group 1 known carcinogens, and 7 IARC Group 2B possible carcinogens. Cancers of the lungs, urinary bladder, liver, kidneys, and gastrointestinal system, allergic contact dermatitis, lung fibrosis, and asthma were some possible disease endpoints. Existing occupational exposure studies focused on solvent exposures, while exposure and biomonitoring studies of amine hardeners and other ingredients of concern in these formulations are lacking.
Conclusions:
The list of chemicals of concern identified here, including sensitizers and carcinogens, can serve as a basis for analytical method development and field exposure assessment studies. A national multi-pronged strategy to reduce chemical exposures and health risks among construction painters is warranted, including research on exposure monitoring and reduction efforts, longitudinal epidemiological studies, and product reformulation.
Related Concept Videos
01:36Types of Toxins
Air pollutants, primarily gases, pose significant threats to respiratory health, leading to conditions like hypoxia, lung cancer, and in extreme cases, death.
Environmental pollutants like...
01:26Toxic Reactions: Overview
Toxicity falls into two primary categories: local and systemic.
Local toxicity appears at the exposure site, such as protein denaturation caused by caustic substances.
In contrast, systemic toxicity requires the toxic agent's absorption and distribution,...
01:26Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
01:27Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...
01:25Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
01:22Healthcare Associated Infections II: Preventive Measures
The best practices for preventing healthcare-associated infections include hand hygiene, patient risk...