MHz repetition rate femtosecond radially polarized vortex laser direct writing Yb:CaF₂ waveguide laser operating in...

In this paper, we report the use of femtosecond radially polarized vortex laser with MHz repetition rate for direct writing of cladding waveguides (WGs) and realization of waveguide laser oscillations in ytterbium-doped calcium fluoride crystal. The negative refractive index modification in Yb:CaF₂ crystal is fabricated by the homemade all-fiber laser amplifier. At 976 nm pump wavelength, these Yb:CaF₂ WGs can achieve continuous-wave (CW) laser oscillation. The length of resonant cavity is 4 mm, and the minimum laser threshold is 116 mW, corresponding to the propagation loss of 0.85 dB/cm, the center wavelength of 1045.2 nm, and the maximum output power of 91 mW. In addition, a saturable absorber mirror (SAM) was prepared by depositing ReS_0.8Se_1.2 on the reflective surface of a dichroic mirror to realize Q-switched waveguide laser output. The output Q-switched pulses with a tunable repetition rate in the range of 125-692.5 kHz, and the shortest pulse duration is 513 ns.