Simultaneous nitric oxide and toluene reduction over Pt-based catalyst
Cheonwoo Jeong1, Dongcheol Lee1, Sungjoong Kim2
1Industrial Gas Research Cell, Research Institute of Industrial Science & Technology (RIST), 187-12, Geumho-ro, Gwangyang-si, Jeollanam-do, 57801, Republic of Korea.
Abstract:
This research investigates the simultaneous reduction of nitric oxide (NOx) and toluene using Pt-based catalysts, aiming at applications in small-scale industrial environmental processes. Catalysts with varying Pt loadings from 0.01 to 3 % were synthesized through wet impregnation, and their dispersion was assessed across several characterizations, revealing effective Pt dispersion even at loadings above 1 %. Under conditions of high toluene feed, the 3 % Pt-loaded catalyst emerged as the most efficient, achieving significant NOx and toluene conversion rates. The performance of this catalyst was thoroughly examined under various operational parameters including NO, toluene, O2 concentrations, gas hourly space velocity (GHSV) and reaction temperature. A short-stress test further underscored its effectiveness, with NOx and toluene conversions reaching 89.7 % and 97.6 %, respectively. Additionally, a preliminary process simulation of the NOx reduction by toluene indicated an energy efficiency improvement of over 8 % compared to conventional RCO and de-NOx processes. The findings suggest the catalyst's potential for NOx reduction in industrial settings, utilizing toluene present in flue gas without the need for additional commercial reducing agents.
Related Concept Videos
02:24Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
02:17Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
02:50Catalysis
01:29Preparation of Amines: Reduction of Oximes and Nitro Compounds
Though catalytic hydrogenation can reduce nitrobenzenes, the reduction is nonselective in the presence of other functional groups. For instance, if nitrobenzene contains an aldehyde group,...
01:28Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
02:13Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...