Related Experiment Video
Updated: Jun 5, 2025

A Flame-Free Method for Sterilizing C. elegans Picks, Spatulas, and Scalpels
Published on: March 4, 2022
Assessment of Ultraviolet-C Light for Sterilization of Hysteroscopy Instruments
Jessica A Mora-Galván1, Luis F Escobar-Ponce1, Andrea Olguín-Ortega1
1Department of Gynecology, National Institute of Perinatology, Mexico City, MEX.
Abstract:
Objective To evaluate the sterilization efficacy of hysteroscopy instruments using ultraviolet C (UV-C) light at a wavelength of 259 nm in the Endoscopic Diagnostic Center of the National Institute of Perinatology. Methods Consecutive patients undergoing office hysteroscopy via the Bettochi vaginoscopy technique were included, excluding those with conditions such as viable intrauterine pregnancy or acute pelvic infection. Samples were collected from six designated sites of the hysteroscope, including the inner sheath, internal holes of the inner sheath, lens, graspers, scissors, and outer sheath. Initially, samples were taken after the first sterilization using a LAOKEN LK/MJG-150 Plasma Sterilizer (Chengdu, China). Next, samples were collected after the routine use of the hysteroscope in the office setting to confirm contamination. Subsequently, a new set of samples were taken after a 20-minute UV-C sterilization cycle with the EsteriUV device. Results The initial sterilization achieved a 96.73% sterilization rate, with ten samples testing positive for Staphylococcus coagulase-negative. Post-hysteroscopy, contamination increased significantly. Afterward, UV-C sterilization achieved a 96.08% sterilization rate, with 11 samples positive for Staphylococcus coagulase-negative and one for Streptococcus anginosus (p=0.66). No clinical infections were reported in any patient within one-month post-procedure. Conclusion UV-C light is a viable alternative for hysteroscopy instrument sterilization, demonstrating comparable efficacy to conventional methods. Further studies are recommended to optimize UV-C parameters for enhanced sterilization efficiency.
Related Concept Videos
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Hand hygiene
Hand washing...
UV–Vis Spectrometers

