Self-template manufacturing of on-skin electrodes with 3D multi-channel structure for standard 3-limb-lead ECG suit

Wearable electrocardiogram (ECG) devices are the mainstream technology in the diagnosis of various cardiovascular diseases, in which soft, flexible, permeable electrodes are the key link in human-machine interface to capture bioelectrical signals. Herein, we propose a self-template strategy to fabricate silver-coated fiber/silicone (AgCF-S) electrodes. With a simple dissolving-curing-redissolving process, the polyvinyl acetate shell around the AgCF core is in-situ removed to form a three-dimensional (3D) multi-channel structure. The conductive fibers overlap each other and pass through the silicon substrate in a network state, so that the electrode can be bent to 180° or stretched to 30%. The 3D multi-channels in AgCF-S adhesive is further coupled with a Kirigami-design structure of flexible substrate, to maintain high flexibility without sacrificing air-permeability, enabling an excellent water evaporation rate of 1.8 μg/mm²/min, and non-allergenic adhere on pigskin after 24 h. Combined with the self-developed standard 3-limb-lead ECG suit, multi-lead signals with high signal-to-noise ratio (SNR) and low variance (σ²), can be transmitted in real-time via Bluetooth and displayed in the client. Typical heart diseases such as coronary, arrhythmia, myocardial infarction, etc., are detected by our ECG equipment, revealing a huge promise in future medical electronics.