Effects of Ethylene Propylene Diene Monomer (EPDM)-Based Polar Macromolecular Compatibilizers on the Low-Temperature...

Integrating rubber with superior low-temperature capabilities, such as ethylene propylene diene monomer (EPDM), is a strategic approach to bolster the low-temperature performance of fluoroelastomer (FKM). However, FKM and EPDM are thermodynamically incompatible. This work synthetized three EPDM-based polar macromolecular compatibilizers, epoxidized EPDM (EPDM-EP), 2,2-trifluoroethylamine-grafted epoxidized EPDM (EPDM-TF), and 2,4-difluorobenzylamine-grafted epoxidized EPDM (EPDM-DF), to enhance the compatibility between FKM and EPDM. These compatibilizers were subsequently incorporated into FKM/EPDM rubber blends. The results revealed that the glass transition temperature (T_g) of FKM/EPDM decreased by 1.3 °C, 2.68 °C, and 2.78 °C, respectively, upon the addition of 10 phr of EPDM-EP, EPDM-TF, or EPDM-DF. Moreover, the T_g of the two phases converged. The tensile strength, elongation at break, and tear strength of the FKM/EPDM rubber blends were also enhanced by the inclusion of these compatibilizers. Notably, EPDM-TF and EPDM-DF exhibited remarkable compatibilization effects due to an increase in polarity. This research not only sheds light on the potential for developing new compatibilizers but also paves the way for innovative applications of FKM and its derivatives.