Investigation of the Influence of Fused Deposition Modeling 3D Printing Process Parameters on Tensile Properties of...

Despite Fused Deposition Modeling (FDM) being an economical 3D printing method known for its material versatility and ease of use, the mechanical performance of FDM-produced components is significantly influenced by process parameter settings. This study investigated the effects of the layer thickness, raster angle, build orientation, and extrusion temperature on the ultimate tensile strength (UTS) and elastic modulus of Polylactic Acid (PLA) specimens using Taguchi methods, with significance analyzed through analysis of variance (ANOVA). The results indicated that the build orientation is the primary factor affecting both the UTS and elastic modulus, with a flat orientation yielding the best performance. ANOVA showed that the build orientation, raster angle, and extrusion temperature significantly influence the UTS, with the build orientation contributing 98.16%. For the elastic modulus, the build orientation and raster angle were significant, contributing 94.83% and 1.76%, respectively. The optimal parameters were a 0.16 mm layer thickness, flat build orientation, 30°/-60° raster angle, and 200 °C extrusion temperature, resulting in predicted UTS and elastic modulus values with error percentages of 4.33% and 2.74%, respectively, compared to experimental values. The regression model demonstrated high predictive accuracy, with R-squared values of 99.71% for the UTS and 99.52% for the elastic modulus.