Related Experiment Video

Updated: Jul 15, 2026

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
10:20

Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae

Published on: July 10, 2015

15.9K

Impact of shipbreaking industries on the Sitakunda coastal environment, Chattogram by analyzing water quality

Shafat Hosen1, Ohidul Alam2, Mohammed Al Amin3

  • 1Institute of Forestry and Environmental Science, University of Chittagong, Chattogram 4331, Bangladesh; Bangladesh Water Development Board, Ministry of Water Resources, Bangladesh.

Marine Pollution Bulletin
|December 18, 2024
PubMed

Keywords:
Coastal ecosystemForeign materialsOccupational healthShipbreakingWater properties

More Related Videos

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies10:44

Clean Sampling and Analysis of River and Estuarine Waters for Trace Metal Studies

Published on: July 1, 2016

11.4K
A Flow-through Exposure System for Evaluating Suspended Sediments Effects on Aquatic Life12:15

A Flow-through Exposure System for Evaluating Suspended Sediments Effects on Aquatic Life

Published on: January 9, 2017

8.4K

Related Concept Videos

Deleterious Substances in Aggregate01:25

Deleterious Substances in Aggregate

Deleterious substances in aggregates can be detrimental to the quality and durability of concrete. These substances include organic impurities like loam, which interfere with cement hydration and are usually present in the sand. These prevent a good bond between aggregate and cement paste. Organic impurities can be detected using the colorimetric test, where the darkness of a solution after agitation indicates the level of organic content.
Another type of impurity is clay and fine material that...
Quality of Water01:19

Quality of Water

In concrete preparation, the quality of water is paramount as it affects the strength and durability of the concrete. Potable water is usually preferred; however, it must not have excessive sodium or potassium to prevent compromising the concrete's integrity. Water quality is typically evaluated based on impurities such as dissolved solids, chlorides, and sulfates, and its pH value is ideally between 6 and 8. Even slightly acidic natural water may be acceptable unless it contains harmful...
Testing Water Quality01:14

Testing Water Quality

When the quality of water for concrete preparation is uncertain, its impact on the setting time of cement and compressive strength of mortar is assessed by comparison with de-ionized or distilled water benchmarks. American Society for Testing and Materials (ASTM) C1602 requires the setting times to be within 90 minutes of the control, British Standard (BS) 3146:1980 allows a 30-minute variance in the initial setting, while British Standards European Norm (BS EN) 1008 specifies initial setting...
Effect of Sea Water on Concrete01:22

Effect of Sea Water on Concrete

Concrete exposed to seawater can undergo degradation like the dissolution of ettringite and gypsum, increasing the material's porosity and decreasing its strength. In contrast, the crystallization of salts within the concrete's pores can cause expansion, particularly above the waterline where evaporation occurs. Nonetheless, this expansion only happens when seawater, enabled by the concrete's permeability, manages to infiltrate the structure.
Concrete in areas between tide marks, which undergo...
Freshwater Microbial Ecology01:24

Freshwater Microbial Ecology

Freshwater systems such as streams, rivers, and lakes exhibit distinct physical and biological characteristics that influence their microbial communities. These environments are broadly categorized into lotic systems—those with flowing waters like streams and most rivers—and lentic systems, which include still or slow-moving waters such as lakes, ponds, and marshes.In lentic systems, phytoplankton drive primary production, generating autochthonous organic carbon. In contrast, lotic systems...