Related Experiment Video
Updated: Jun 4, 2025

Assessment of Boron Doped Diamond Electrode Quality and Application to In Situ Modification of Local pH by Water Electrolysis
Published on: January 6, 2016
Mechanism and Process Optimization in the Electrooxidation of Oxalic Acid Using BDD Electrode under Nitric Acid
Abstract:
Various electrochemical tests were carried out to elucidate the electrolytic oxidation mechanism of oxalic acid on a boron-doped diamond electrode in a nitric acid environment. These included cyclic voltammetry, AC impedance, constant current electrolysis, and electron paramagnetic resonance spectroscopy. The impact of electrode potential, current density, nitric acid concentration, and electrode plate spacing on the oxidation of oxalic acid was investigated. In the electrolysis mechanism, indirect oxidation of· •OH plays a major role and direct oxidation at the electrode plays a minor role. Excessive nitric acid concentration will reduce the electrooxidation rate of oxalic acid. The optimal process conditions for electrolyzing oxalic acid are obtained as follows: the plate spacing is 2 cm, and the current density is 60 mA cm-2. Finally, the BDD electrode can electrolyze the oxalic acid concentration to below 0.001 mol/L, which can meet the process requirements.
More Related Videos
09:02Synthesis of Platinum-nickel Nanowires and Optimization for Oxygen Reduction Performance
Published on: April 27, 2018
10:27Simultaneous Multi-surface Anodizations and Stair-like Reverse Biases Detachment of Anodic Aluminum Oxides in Sulfuric and Oxalic Acid Electrolyte
Published on: October 5, 2017
Related Concept Videos
Electrolysis
Electrodeposition
Electrodeposition can...
Ladder Diagrams: Redox Equilibria
Consider the Fe3+/Fe2+ half-reaction, which has a standard-state potential of +0.771 V. At potentials more positive than +0.771 V, Fe3+ predominates, whereas Fe2+...
Balancing Redox Equations
Rate-Determining Steps
In a multistep reaction mechanism, one of the elementary steps progresses significantly slower than the others. This slowest step is called the rate-limiting step (or rate-determining step). A reaction cannot proceed faster than its slowest step, and hence, the rate-determining step limits the overall reaction rate.
The concept of rate-determining step can be understood from the analogy of a 4-lane freeway with a short-stretch of traffic-bottleneck caused due to...
Oxidation of Alkenes: Syn Dihydroxylation with Potassium Permanganate