Enhancement of Water Uptake in Composite Superabsorbents Based on Carboxymethyl Cellulose Through Porogen...

Carboxymethyl cellulose sodium salt (CMC)-based superabsorbents are promising materials for the development of agricultural matrices aimed at water management and slow-release fertilizer production. However, an increase in the CMC content tends to reduce their water-absorbing capacity. This study aims to develop a cost-effective method for producing eco-friendly superabsorbents with enhanced water-absorbing capacity by incorporating a porogen and employing lyophilization. Superabsorbents containing 10 wt% CMC (CMC-SAPs) were synthesized via free radical polymerization with the addition of 0, 5, or 10 wt% ammonium carbonate as a porogen, followed by lyophilization. The synthesized CMC-SAPs were characterized using Fourier-transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction. The results revealed that CMC-SAPs prepared with the incorporation of a porogen and/or subjected to lyophilization exhibited well-developed surfaces featuring macropores and cavities. Incorporating 5 wt% ammonium carbonate as a porogen, followed by lyophilization, increased the equilibrium swelling ratio to 61%. This improvement was attributed to the enhanced surface morphology of the modified CMC-SAPs, which facilitated water molecule diffusion into the SAP matrix, as confirmed by open porosity measurements. This hypothesis was further supported by the diffusion coefficient values, which were higher for porogen-containing and lyophilized SAPs compared to unmodified samples. Moreover, the CMC-SAPs demonstrated good reusability. Thus, the combination of porogen incorporation and subsequent lyophilization represents a promising approach for enhancing the water uptake capacity of CMC-based composite superabsorbents for sustainable agricultural applications.