Related Experiment Video
Updated: May 8, 2025

The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
Deep reinforcement learning and fuzzy logic controller codesign for energy management of hydrogen fuel cell powered
Seyed Mehdi Rakhtala Rostami1, Zeyad Al-Shibaany2,3, Peter Kay4
1School of Engineering, University of the West of England Bristol, Bristol, UK. Mehdi.Rakhtalarostami@uwe.ac.uk.
Abstract:
Hydrogen-based electric vehicles such as Fuel Cell Electric Vehicles (FCHEVs) play an important role in producing zero carbon emissions and in reducing the pressure from the fuel economy crisis, simultaneously. This paper aims to address the energy management design for various performance metrics, such as power tracking and system accuracy, fuel cell lifetime, battery lifetime, and reduction of transient and peak current on Polymer Electrolyte Membrane Fuel Cell (PEMFC) and Li-ion batteries. The proposed algorithm includes a combination of reinforcement learning algorithms in low-level control loops and high-level supervisory control based on fuzzy logic load sharing, which is implemented in the system under consideration. More specifically, this research paper establishes a power system model with three DC-DC converters, which includes a hierarchical energy management framework employed in a two-layer control strategy. Three loop control strategies for hybrid electric vehicles based on reinforcement learning are designed in the low-level layer control strategy. The Deep Deterministic Policy Gradient with Twin Delayed (DDPG TD3) is used with a network. Three DRL controllers are designed using the hierarchical energy optimization control architecture. The comparative results between the two strategies, Deep Reinforcement Learning and Fuzzy logic supervisory control (DRL-F) and Super-Twisting algorithm and Fuzzy logic supervisory control (STW-F) under the EUDC driving cycle indicate that the proposed model DRL-F can ensure the Root Mean Square Error (RMSE) reduction for 21.05% compared to the STW-F and the Mean Error reduction for 8.31% compared to the STW-F method. The results demonstrate a more robust, accurate and precise system alongside uncertainties and disturbances in the Energy Management System (EMS) of FCHEV based on an advanced learning method.
More Related Videos
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Batteries and Fuel Cells
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...

