Related Experiment Video
Updated: May 7, 2025

Biomass Conversion to Produce Hydrocarbon Liquid Fuel Via Hot-vapor Filtered Fast Pyrolysis and Catalytic Hydrotreating
Published on: December 25, 2016
Catalytic and Noncatalytic in Situ Hydrogen Production from Heavy Oil: A Review of Experimental Studies
Mohamed Abdalsalam Hanfi1, Olalekan Saheed Alade2, Abdulkadir Tanimu3
1Department of Petroleum Engineering, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran 31261, Saudi Arabia.
Abstract:
Hydrogen (H2) offers a less carbon-intensive energy production method than natural gas. The potential of utilizing hydrogen at a large scale within the future energy mix to fuel the world opens the door to investigating hydrogen production from heavy and extra-heavy oil reservoirs. Various reaction mechanisms are involved in the in situ combustion gasification of heavy oil to produce sustainable and low carbon intensive hydrogen. In-situ catalytic hydrogen production involves injecting a catalyst into the reservoir or utilizing the in situ reservoir materials to catalyze the various reactions. Clay minerals and formation water were found to serve as in situ catalytic materials and enhance the in situ hydrogen production process. This work presents a comparative review of the catalytic and noncatalytic experimental studies carried out on in situ hydrogen production. The formation damage induced by the in situ combustion and its effect on hydrogen production was highlighted. In addition, the impact of the formation damage induced by the in situ combustion on the hydrogen production process is discussed. This study categorized the experimental studies conducted on the hydrogen production from heavy oil into catalytic and noncatalytic processes to highlight the effect of the synthetic and natural reservoir catalytic materials on in situ hydrogen production.
More Related Videos
12:08Catalytic Reactions at Amine-Stabilized and Ligand-Free Platinum Nanoparticles Supported on Titania During Hydrogenation of Alkenes and Aldehydes
Published on: June 24, 2022
08:40Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production
Published on: December 6, 2021
Related Concept Videos
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Catalysis
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.