Related Experiment Video
Updated: May 7, 2025

Cooling Rate Dependent Ellipsometry Measurements to Determine the Dynamics of Thin Glassy Films
Published on: January 26, 2016
Phase Diagram, Glassy Dynamics and Crystallization Kinetics of the Biobased Polyester Poly(ethylene 2,5-furanoate)
Ioannis Tzourtzouklis1, Panagiotis Kardasis1, George Z Papageorgiou2,3
1Department οf Physics, University οf Ioannina, Ioannina 45110, Greece.
Abstract:
We report the pressure-temperature (P-T) phase diagram, the origin of the subglass dynamics, and the crystallization kinetics of the biobased polyester poly(ethylene 2,5-furanoate) (PEF), through dielectric spectroscopy (DS) measurements performed as a function of temperature and pressure. The phase diagram comprises four different "phases"; glass, quenched melt, crystalline, and normal melt. The cold crystallization temperature, T cc, increases linearly with pressure (according to the Clausius-Clapeyron equation) as dT cc/dP | →0 ∼ 240 K·GPa-1 and is accompanied by a small change in specific volume (ΔV = 0.028 cm3/g). This contrasts with the stronger dependence of the glass temperature, T , with a pressure coefficient, dT /dP | →0, of 383 K·GPa-1, typical of rigid polymers. With the application of pressure, we address the molecular origin of the subglass β-process through the apparent activation volume, a quantity accessible only by pressure experiments. Moreover, increasing pressure densifies the segmental process but blocks the β-process, with possible implications in the gas-barrier properties. The crystallization kinetics from the quenched melt to the cold-crystallized state was explored by thermodynamics (differential scanning calorimetry, DSC), dynamics (DS), and structure (via simultaneous X-ray scattering at small (SAXS) and wide (WAXS) angles) following different routes within the phase diagram. Interestingly, all probes followed the same sigmoidal kinetics (of the Avrami type) with comparable time scales. Inspection of the evolution of the dielectric strength for the different dynamic processes during isothermal crystallization (at T c = 402 K; P = 0.1 MPa) revealed the absence of the restricted amorphous fraction (RAF) at the early stages of crystallization. This observation is in line with the proposed mesomorphic phase-an intermediate phase formed during crystallization in the absence of chain folding, as suggested by G. Strobl. Subsequent growth of the RAF followed the same Avrami kinetics as identified by the thermodynamic and structural probes. Shallow quenches within the P-T phase diagram identified experimental routes for keeping PEF in the metastable quenched amorphous state for long times.
More Related Videos
06:55Synthesis of Cyclic Polymers and Characterization of Their Diffusive Motion in the Melt State at the Single Molecule Level
Published on: September 26, 2016
08:55Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses
Published on: June 7, 2018
Related Concept Videos
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polymer Classification: Architecture
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...