Influence and Mechanism of Solid-Phase Particle Factors on Oil-Solid Separation of Oily Sludge Treated by Flotation...

The solid phase composition in oily sludge (OS) is a key factor affecting the oil-solid separation of OS. In this paper, the effects and mechanisms of solid-phase particle factors on the oil content of residue phase were investigated in order to improve the oil-solid separation efficiency. Flotation experiments were carried out on single-size sand and mixed-size sand OS consisting of three particle sizes at room temperature without adding flotation reagents. The effects of different-size particles as solid phase composition of OS and flotation parameter settings such as flotation temperature (Tp), flotation time (Tt), impeller speed (Rs) and liquid-solid ratio (L/OS) on the oil-solid separation efficiency were investigated. The experimental results showed that the oil content of residue phase decreased with the increasing of solid-phase particle size for single-size sand OS, and the optimal flotation conditions were Tp of 50 °C, Tt of 25 min, Rs of 1450 r/min and L/OS of 12:1. The oil-solid separation was more pronounced for mixed-size sand OS with a complex particle composition, while different particle compositions of the solid phase in OS promoted oil-solid separation. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR) characterisation of OS before and after flotation confirmed the relative advantage of coarse particle OS in the oil-solid separation process. The classical first-order model was well fitted to the flotation kinetic process of single-size sand and mixed-size sand OS. The response surface methodology (RSM) method was used to determine the Rs as the main control factor of the flotation process, and the oil content of residue phase in mixed-size sand OS was optimised to 2.63%. This study provides important process parameters and theoretical basis for the efficient treatment of OS.