Mercury Adsorption by Ca-Based Shell-Type Polymers Synthesized by Self-Assembly Mineralization

Adsorption is one of the most promising strategies for heavy metal removal. For Hg(II) removal, mineralized Ca-based shell-type self-assembly beads (MCABs) using alginate as organic polymer template were synthesized in this work. The adsorbent preparation consists of gelation of a Ca-based spherical polymer template (CAB) and rate-controlled self-assembly mineralization in bicarbonate solution with various concentrations. The comparative study demonstrates that 1% (MCAB-1) is the optimal concentration of bicarbonate. Based on this condition, the maximum adsorption capacity (48 ± 4 mg/g) of MCAB-1 was observed at pH = 5 in a batch test, which was 2.67 times more than that of the unmodified one, CAB, at 18 ± 1 mg/g. Long-duration (10 h) adsorption tests showed that MCAB-1 exhibited remarkable performance stability and anti-wear ability (43.2% removal efficiency and 74.3% mass retention, compared to 2.7% and 38.6% for CAB at pH = 3, respectively). The morphology determination showed that a shell-type porous amorphous carbonate layer was formed at the surface of the organic polymer template by rate-controlled self-assembly mineralization. This transition not only promotes the pore structure and activated cation binding functional sites, but also improves the anti-wear ability of materials effectively.