Numerical simulation of coal particle motion characteristics in the envelope region of spiral drum based on discrete...

In order to study the movement characteristics of coal particles in the coal loading process of spiral drums, the spiral drum of a certain type of shearer was taken as the research object, and the intrinsic parameters of the materials were calibrated through the determination results of coal sample properties, the relevant parameters of coal particle adhesion were determined, and a discrete element model of spiral drum coal loading was established. The distribution of coal particle movement subsequent to the fracture of the coal wall was derived through simulation. By spatially dividing the envelope region of the spiral drum along the radial and axial directions, the number and velocity distribution of coal particles in different envelope regions were obtained. The study revealed that the number of coal particles in radial regions III and IV was significantly higher than that in regions I and II. Most of the coal particles in regions III and IV moved outward along the drum axis under the action of the spiral blades, while a small portion moved from regions III and IV towards regions I and II. The coal particles in the axial region near the outer side of the coal wall have a strong ability to flow towards the scraper conveyor, and the probability of coal particles being thrown towards the rear of the spiral drum is higher in the region near the end plate. The increase in traction speed has little effect on the velocity of coal particles in all directions within the envelope region, while the increase of drum rotation speed can significantly improve the velocity of coal particles in each region. Through statistical analysis, it was found that the coal loading rate decreases with the increasing of traction speed. As the drum speed increases, the coal loading rate first increases and then decreases. By comparing the results of industrial experiments and numerical simulations underground, the accuracy of the discrete element method used in this paper to analyze the particle motion in the envelope region of the spiral drum has been confirmed. The research results provide reference for the selection of motion parameters of coal shearer and the improving of coal loading efficiency of spiral drums.