Related Experiment Video
Updated: Jun 2, 2025

Tuning Oxide Properties by Oxygen Vacancy Control During Growth and Annealing
Published on: June 9, 2023
Electron-phonon coupling and thermal transport properties of GaN/AlGaN heterojunction under strain regulation
Jiao Chen1, Zumeng Shan1, Baoyi Hu1
1Thermal Engineering and Power Department, China University of Petroleum, Qingdao 266580, China. wzhaoliang@upc.edu.cn.
Abstract:
In the study of GaN/AlGaN heterostructure thermal transport, the interference of strain on carriers cannot be ignored. Although existing research has mainly focused on the intrinsic electronic and phonon behavior of the materials, there is a lack of studies on the transport characteristics of the electron-phonon coupling in heterostructures under strain control. This research comprehensively applies first-principles calculations and the Boltzmann transport equation simulation method to deeply analyze the thermal transport mechanism of the GaN/AlGaN heterojunction considering in-plane strain, with particular attention to the regulatory role of electron-phonon coupling on thermal transport. The study found that electron-phonon coupling increases additional phonon scattering and reorganizes phonon frequencies. Strain significantly regulates the degree of electron-phonon coupling in the GaN/AlGaN heterojunction, which is an effective strategy for controlling the thermoelectric properties of semiconductor materials, where compressive strain enhances coupling while tensile strain weakens it. In addition, in-plane stress causes the redistribution of interface charges, leading to the delocalization migration of electrons from Ga and Al regions to the N atoms, reducing localization. Compressive strain drives the migration of electrons from AlGaN to GaN, forming a more stable two-dimensional electron gas, while tensile strain inhibits this migration. Furthermore, compressive strain promotes the increase of phonon frequencies and the reduction of the bandgap, while tensile strain has the opposite effect. Strain optimizes the delocalization of phonon modes, enhancing the role of low-frequency phonons in interface thermal transport. At the same time, in-plane stress, especially compressive stress, suppresses ballistic phonon transport, affecting the non-equilibrium state of phonons. This study not only enriches the understanding of electron-phonon coupling phenomena in GaN/AlGaN heterojunctions but also provides a theoretical basis and guidance for the strain design and device application of semiconductor materials.
Related Concept Videos
Thermal Strain
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
Measurements of Strain
Design Example: Strain Gauge Bridge or Wheatstone Bridge

