Simulations of the potential for diffraction enhanced imaging at 8 kev using polycapillary optics

Conventional x-ray radiography relies on attenuation differences in the object, which often results in poor contrast in soft tissues. X-ray phase imaging has the potential to produce higher contrast but can be difficult to utilize. Instead of grating-based techniques, analyzer-based imaging, also known as diffraction enhanced imaging (DEI), uses a monochromator crystal with an analyzer crystal after the object. Analyzer-based systems most commonly employ synchrotron sources to provide adequate intensity, and typically use higher photon energies. In this work, a simulation has been devised to assess the potential for a polycapillary-based system. A polycapillary collimating optic has previously been shown to greatly enhance the intensity of the beam diffracted from the monochromatizing crystal. Detailed simulation of the optic is computationally intensive and requires comprehensive knowledge of the internal shape of the optic, so a simple geometric model using easier to obtain optic output data was developed and compared to the more detailed simulation. After verification, refraction band visibility was used as a quality parameter to address the effectiveness of the polycapillary-based DEI system at x-ray photon energies of 8 and 17.5 keV. The result shows promise for a polycapillary-coupled analyzer-based system even at low x-ray photon energy.