Thermal Desorption Hyphenated to Comprehensive Two-Dimensional Gas Chromatography-Time-of-Flight Mass Spectrometry
Agathe Legendre1,2, Sandy Bsaibes2, Claudia Paijens2
1Department of Analytical, Bioanalytical Sciences and Miniaturization (LSABM) Chemistry, Biology and Innovation (CBI), UMR CNRS-ESPCI Paris, ESPCI Paris, PSL University, CNRS, Paris, France.
Abstract:
In the context of the energy transition, European countries pursue the common goal of increasing the share of renewable gases (from anaerobic digestion, pyrogasification, and hydrothermal gasification for instance) in the gas mix. Although produced gases are mainly composed of methane after upgrading, impurities of various natures and quantities may also be present in the produced raw gases and still after upgrading, including volatile organic compounds (VOCs) at trace levels that may have an impact on different stages of the gas chain even at low concentrations. These new renewable and/or low-carbon gases imply the need to develop new analytical tools to deeply characterize them, and thus fully manage their integration into the gas value chain. In this study focused on VOC analysis, a sampling approach using pre-concentration on an adsorbent phase was developed for gas sampling to ensure rapid collection, requiring only a small volume (≈ 100 mL). Traces were then analyzed by thermal desorption hyphenated to a comprehensive two-dimensional gas chromatography time-of-flight mass spectrometer. After identifying the compounds, a semi-quantification method was developed to provide an estimation of the concentration of VOCs for each chemical family. The method was first developed on a biomethane sample before being successfully applied to a raw gas produced by hydrothermal gasification, in which around 250 compounds were detected at a trace level (total concentration equivalent at 200 µg/L).
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...


