Fatigue Life Analysis of Titanium Torsion Spring Based on Continuous Damage Mechanics

In this study, a titanium alloy torsional spring used in aviation was taken as the research subject. Aiming at the fatigue life prediction problem of this spring, the life analysis of the titanium alloy torsional spring was performed using a customized UMAT subroutine based on the theory of continuous damage mechanics. Several sets of life prediction models and tests were compared. The fatigue lives of the springs at 60, 80, 100, and 120 degrees were 45,070, 65,067, 99,677, and 181,322 cycles, respectively. Compared with other fatigue life prediction methods, the fatigue life calculated by the customized subroutine was the most consistent with the fatigue life of the titanium alloy torsion spring tests. The average relative error between the measured experimental life value and the predicted value was 2.04%, which is less than 5%, meeting engineering measurement requirements. The effectiveness and applicability of the proposed model and method were verified, and the time and economic cost caused by excessively long experimental cycles were reduced. This helps improve the accuracy of fatigue life prediction for this titanium alloy torsional spring and provides analysis support for subsequent structural optimization and improvement.