Correlation of Solidification Thermal Variables with Microstructure and Hardness in CuMn11Al8Fe3Ni3...

The mechanical properties of a final product are directly influenced by the solidification process, chemical composition heterogeneity, and the thermal variables during solidification. This study aims to analyze the influence of solidification thermal variables on the microstructure, hardness, and phase distribution of the CuMn11Al8Fe3Ni3. The alloy was directionally and upward solidified from a temperature of 1250 °C. Heat extraction occurred through a water-cooled AISI 1020 steel interface. The thermal variables were recorded using a data acquisition system, with temperature monitored at seven different positions, where cooling rates varied from 13.03 °C/s at the closest position to 0.23 °C/s at the farthest. The Brinell hardness decreased from 199 HB at the highest cooling rate position to 184 HB at the slowest cooling rate position. This indicates that higher cooling rates increase the hardness of the alloy, which can be attributed to the stabilization of the metastable β phase with refined and equiaxial grains due to iron addition. Vickers microhardness was observed in regions subjected to slower cooling (244 HV) compared to faster cooling regions (222 HV). Therefore, the correlation between solidification thermal variables and alloy properties provides valuable insights into the relationship between microstructure and the properties of the CuMn11Al8Fe3Ni3 alloy.