Multiscale Numerical Study of Enhanced Ductility Ratios and Capacity in Carbon Fiber-Reinforced Polymer Concrete...

Rigid reinforced concrete (RC) frames are generally adopted as stiff elements to make the building structures resistant to seismic forces. However, a method has yet to be fully sought to provide earthquake resistance through optimizing beam and column performance in a rigid frame. Due to its high corrosion resistance, the integration of CFRP offers an opportunity to reduce frequent repairs and increase durability. This paper presents the structural response of CFRP beams integrated into rigid frames when subjected to seismic events. Without any design provision for CFRP systems in extreme events, multiscale simulations and parametric analyses were performed to optimize the residual state and global performance. Macroparameters, represented by the ductility ratio and microfactors, have been analyzed using a customized version of the modified compression field theory (MCFT). The main parameters considered were reinforcement under tension and compression, strength of concrete, height-to-width ratio, section cover, and confinement level, all of which are important to understand their influence on seismic performance. The parametric analysis results highlight the increased ductility and higher load-carrying capacity of the CFRP-reinforced tested component compared to the RC component. These results shed light on the possibility of designing CFRP-reinforced concrete components that could improve ductile frames with increased energy dissipation and be suitable for applications in non-corrosive seismic-resistant buildings. This also shows reduced brittleness and enhancement in the failure mode. Numerical simulations and experimental results showed a strong correlation with a deviation of about 8.3%, underlining the reliability of the proposed approach for designing seismic-resistant CFRP-reinforced structures.